Kansas Plumbing, Heating, Cooling Contractors Association
 Kansas Plumbing, Heating, Cooling Contractors Association

If you have any questions regarding Continuing Education Approval Requirements or need information please contact the

Kansas Mechanical Review Board Chairman:

Stoney Nethercot

Chief Mechanical Inspector
271 W 3rd St N  Suite #301  Wichita, KS. 67202
p: 316.660.1829
Stoney.Nethercot@sedgwick.gov

Continuing Education Application Process

  • The Kansas Mechanical Review board will accept Proctored Live Training Remote Classes following all of the same criteria as an in person class. ​

  • When filling out an application remember to mark whether the class will be Code or Non-Code General Education. 

  • Sponsors, it is your responsibility to share this information with your instructors, so they know what the process is prior to them teaching a class. All documents need to be at the class location prior to start of the class.
  • Documents must retain the Class numbers and information issued by Kansas PHCC.

  • Forms Must be legible! 

  • Sign in sheets Must be filled out at the beginning of the class.

  • Evaluation Forms Must be filled out at the end of the class.

  • Certificate of Attendance Must be issued to attendees after their Evaluation Form is turned in to the instructor or sponsor.

  • Completed sign in forms and Evaluation Forms Must be returned to Kansas PHCC by mail or electronically to remain on file.

Read Entire Page Below Prior to Clicking

 

Sponsors filling out application please read below to see which municipalities accept KMTRB APPROVED Continuing Education.

 

Read Instructions below before filling out a CEU Application

 

Application is at Bottom of this Page

 

Criteria Guidelines for Submittal and Approval of Continuing Education Courses

Continuing Education Course Approvals shall be submitted to the Review Board for approval At Least 10 days  prior to the course being conducted and shall include:

• Completed continuing education application form for each date or set of dates that constitute one class. If submitting for code approval the Code subject matter needs to be on the agenda!! Make sure to mark the correct corresponding class whether CODE or GENERAL education.

• An agenda detailing the material to be presented in the course shall accompany the continuing education request. If code is being taught reference the code. Without reference the class will be approved for General Education only.

• A brief summary of qualifications for each instructor shall accompany the continuing education request.

 

1. Continuing education classes shall be offered in not less than one-half hour increments with a one hour minimum.

2. Continuing education courses shall not be conducted in the licensee’s regular work place during normal business hours.

3. Continuing education course offerings shall be advertised and open to all license holders (posting of the course on the website calendar will be considered as advertising)

4. An evaluation form furnished by the Review Board shall be completed by each person attending the course and shall be returned to the Board.

5. The sponsoring group shall be responsible for verification of attendance and shall submit sign-in sheets to the Board.

6. Any deviation from a Board approved agenda or change in instructors shall be approved prior to the presentation.

7. Review Board shall be advised of any course cancellation

8. Approval of any course submitted is by a simple majority vote of the Review Board

9. Any course not meeting the above criteria will still be considered. Detailed explanation of why the course should be accepted must be submitted with the standard course application.

 

The intent of these criteria is to standardize and accept any legitimate training courses or classes around the state. It is the standardization and consistency that will assure all building officials in the State of a legitimate training product.

 

MISSION STATEMENT

 

“To Establish a Standardization of Quality for Continuing Education Courses Statewide While Maintaining Ease of Accessibility Throughout the State”

 

Kansas Mechanical Trades Review Board

***********************************************************************************************************************************************

A letter from the Heart of America Chapter, International Code Council:

For the purpose of license renewal, the building departments of the following jurisdictions have agreed to accept any course listed on the KMTRB calendar (Please note that you should still check with your local jurisdiction to determine if continuing education courses are required to be trade specific):

 

Arkansas City* Accepts KMTRB Classroom Training but does not recognize

on-line training approved by KMTRB.

ConcordiaAccepts KMTRB Classroom Training but does not recognize

on-line training approved by KMTRB.

Dodge City

El Dorado

Emporia

Gardner

Garden City

Goodland

Hays

Hugoton

Hutchinson

Lawrence

Manhattan

Newton

Park City

Parsons

Pittsburg

Salina

Sedgwick County

Topeka

 

Welllington* Accepts KMTRB Classroom Training but does not recognize

on-line training approved by KMTRB.

 

Wichita*Accepts KMTRB Classroom Training but does not recognize Electrical Classes approved by KMTRB

 

Winfield* Accepts KMTRB Classroom Training but does not recognize 

on-line training approved by KMTRB.

 

Johnson County**WILL NOT ACCEPT KMTRB APPROVED CLASSES 

 

Miami County**WILL NOT ACCEPT KMTRB APPROVED CLASSES as of 2019

 

 

Please check this list as cities and counties continue to sign on.

 

This is not to imply that these jurisdictions may not approve other training in addition to that listed on the KMTRB calendar. Please check with your local building department to obtain prior approval of training not on the KMTRB calendar or if your local department does not appear on this list.

 

* Denotes communites that do not necessarily approve all courses listed on the KMTRB calendar. KMTRB will make every attempt to identify those courses not approved by these jurisdictions.

 

**Johnson County licenses the contractor. Please check with appropriate Johnson County Officials to see which trade classes they may accept for their contractors license.

 

 

If you have any questions regarding Continuing Education Approval Requirements or need information please contact the Kansas Mechanical Review Board Chairman:

Stoney Nethercot

Chief Mechanical Inspector
271 W 3rd St N  Suite #301  Wichita, KS. 67202
p: 316.660.1829
Stoney.Nethercot@sedgwick.gov

Your form message has been successfully sent.

You have entered the following data:

Application For CEU Approval

Please correct your input in the following fields:
Error while sending the form. Please try again later.

Note: Fields marked with * are required

PayPal Payment can not be made at this time.

We will invoice you when class has been approved then payment can be made by Check (preferably) or Credit Card.

 

 

Kansas Plumbing, Heating, Cooling Contractors Association
1632 S West St

Suite 3  
Wichita, KS 67213 

Phone: 316 943-7100

Email: office@phccks.org

Leave a message if I don't answer & I will return your call.

As always call or email me with questions.

Joleen

 

 

 

 

Print Print | Sitemap
© Kansas Plumbing, Heating, Cooling Contractors Association